Ambient temperature mechanical properties of Al–8.5Fe–1.3V–1.7Si/SiCP composite
2007
Abstract Ambient temperature mechanical properties of Al–8.5Fe–1.3V–1.7Si/15 vol.%SiC P composite sheet prepared by a spray deposition (SD)–rolling process were investigated. The experimental results show that the densification method of the as-deposited preforms has an obvious effect on the mechanical properties of the as-rolled sheets. The σ b and δ were 535 MPa and 7%, respectively, for the sheet with the preforms extruded at 490 °C and then rolled at 490 °C. When the preforms were pressed at 450 °C and then rolled at 490 °C, the obtained σ b and δ were up to 620 MPa and 9.5%. The microstructures, density and rigidity are also examined.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
12
References
16
Citations
NaN
KQI