Analysis of drying stresses in green-glued plywood of Bete ( Mansonia Altissima ) specie

The wood veneer dried artificially before gluing for the manufacture of plywood generally suffers several damages (cracks, deformations), decreasing the competitiveness of the process and limiting the use of nervous species of wood. The proposed solution is to glue them at the green state. However, during the drying process, superficial and internal cracks are observed. These cracks appear when stresses due to the anisotropic shrinkage of the plywood exceed the mechanical strength of the wood material. In the present study, the response of a 3-ply plywood of Bete (Mansonia altissima) glued at the green state is simulated in order to evaluate these stresses and deformations during drying using a finite element method program. The numerical results and associated experimental data make it possible to better analyze and understand the mechanical behavior of the plywood during drying in order to look for reliable plywood through new process.