Prospective clinical evaluation of chairside-fabricated zirconia-reinforced lithium silicate ceramic partial crowns-5-year results.

OBJECTIVES A university-based randomized clinical study evaluated the 5-year performance of chairside-fabricated zirconia-reinforced lithium silicate (ZLS)-ceramic partial crowns. MATERIAL AND METHODS Forty-five patients were restored with 61 chairside-fabricated ZLS-restorations (Cerec SW 4.2, Dentsply Sirona, Germany; Vita Suprinity, Vita Zahnfabrik, Germany). Deviating from the manufacturers' recommendations, restorations with reduced minimum material thicknesses (MMT) were fabricated: group 1, MMT = 0.5-0.74 mm (n = 31); group 2, MMT = 0.75-1.0 mm (n = 30). For luting, a self-adhesive cement (SAC) or a total-etch technique with a composite cement (TEC) was applied. Statistical evaluation was performed by time-to-event analysis (Kaplan-Meier). Possible covariates of the survival (SVR) and success rates (SCR), evaluated in a Cox regression model, were MMT, restoration position (premolar/molar), and cementation technique (SAC vs. TEC). RESULTS Forty patients (54 restorations, premolars, n = 23; molars, n = 31) participated in the 5-year follow-up. Five losses due to ceramic fractures occurred in group 1 (n = 28) (SVR: 83.0% [95% confidence interval (CI): 0.71-0.96]). Group 2 (n = 26) showed no losses (SVR: 100%). The success rate for partial crowns placed on premolars was 100% and 69% (95% CI: 0.54-0.84) for molar restorations. Recementation was required in 4 restorations with SAC (SCR: 86% [95% CI: 0.73-0.99]; SCR-DC: 100%). Restorations in group 2 showed a significantly reduced risk of material fracture hazard ratio (HR) = 0.09, p = 0.0292) compared with the restorations in group 1. Molar partial crowns showed an increased risk for a clinical intervention (HR = 5.26, p = 0.0222) compared to premolar restorations. CONCLUSIONS Material thickness and position of the restoration are risk factors influencing the survival and success rate of ZLS-ceramic partial crowns. CLINICAL RELEVANCE Observation of an MMT of at least 0.75-1.0 mm for ZLS-ceramics is essential to avoid material-related fractures. CLINICAL TRIAL REGISTRATION German Clinical Trails Register (trial number: DRKS00005611).