Experimental investigation of a strain gauge sensor based on Fiber Bragg Grating for diameter measurement

Abstract A strain gauge sensor based on Fiber Bragg Grating (FBG) for diameter measurement is proposed and experimentally demonstrated. The sensor is easily fabricated inserting the FBG on the strain gauge—it was fabricated using a 3D printer—and fixing the FBG in two points of this structure. The idea is to vary the diameter of the structure. We developed two experimental setups, the first one is used to evaluate the response of the FBG to strain and the second one to assess the possibility of using the structure developed to monitor the desired parameter. The results demonstrated that the structure can be used as a way to monitor the diameter variation in some applications. The sensor presented a sensitivity of 0.5361 nm/mm and a good linear response of 0.9976 using the Strain Gauge with FBG and fused taper.