Effect of Sucrose on Physicochemical Properties of High-Protein Meringues Obtained from Whey Protein Isolate
2021
This study reports the possibility of obtaining the WPI-based meringues with the small sucrose content (0–15%). The whey protein isolate (WPI) solution (20%, w/v) was whipped and sucrose was added to foam at the concentrations of 5, 10 and 15%. The surface tension, viscosity, zeta potential of the pre-foam solutions, foam overrun, foam stability and their rheological properties (G′, G″ and tan (δ)) were evaluated. To produce meringues, liquid foams were solidified at 130 °C for 2 h. The surface properties (roughness, contact angles, apparent free surface energy) as well as microstructural ones were determined for the solid foams (meringues). The 15% sugar concentration was detrimental for overrun, stability and rheological properties of liquid foams. The meringue production without sugar was infeasible. The addition of the smallest amount of sucrose (5%) enabled preservation of the aerated structure of the liquid foam during solidification. The 10% sugar concentration increased the stability of liquid foam, its rheology and it was the most effective for air bubbles stabilization during the foam solidification, however, its largest addition (15%) resulted in an increase in the final meringue volume. Larger sucrose concentrations produced a smoothing effect on the meringue surfaces.
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
44
References
2
Citations
NaN
KQI