The Effect of Laser Beam Wobbling Mode on Weld Bead Geometry of Tailor Welded Blanks

2020 
As a higher weight leads to increased fuel consumption for the automobile industry, the body in white must be lighter to compensate for the weight of additional components. Therefore, tailored blanks are used, which reinforce the body in white only in areas where a higher strength or stiffness is necessary. The applicability of laser welding processes with its numerous advantages, such as low heat input and production efficiency, is often limited when joining imperfect edges steel sheets due to small gap bridging ability. To overcome this limit, recent developments in the laser industry have introduced a novel method to wider the applications of lasers through the utilization of fast beam oscillation techniques, also known as laser beam wobbling. In this study, the effects of the four different amplitudes (0.5 mm, 1 mm, 1.5 mm and 2 mm) of circular laser beam oscillation patterns on the weld bead geometry and microhardness distribution were investigated. The results revealed that the weld bead width increased with the increase of wobble amplitude. Moreover, the tensile strengths of the welded blanks were higher than the AHSS base metal for all amplitude levels.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    15
    References
    0
    Citations
    NaN
    KQI
    []