Ferric Oxide-Containing Waterworks Sludge Reduces Emissions of Hydrogen Sulfide in Biogas Plants and the Needs for Virgin Chemicals

Ferric oxide-containing waterworks sludge can be used to reduce the formation of hydrogen sulfide during anaerobic digestion. The ferric compound is reduced biochemically in the digester and forms insoluble pyrite in digester sludge. Virgin ferric chloride is often used to solve the hydrogen sulfide problem. Since 2013, Sydvatten AB has supplied a growing number of digestion plants in Sweden with ferric-containing dewatered waterworks sludge derived from the drinking water treatment plant Ringsjoverket to limit the formation of hydrogen sulfide. At the waterworks, ferric chloride is added to enhance the coagulation of organic matter from the source water. The sludge formed in this process is dewatered and landfilled, but also recycled in biogas production in order to decrease the hydrogen sulfide concentration. In this study, the use of sludge for hydrogen sulfide removal in digesters was technically and economically evaluated via case studies from 13 full-scale digesters in Sweden. Compared with the use of fresh ferric chloride, the operational costs are reduced by up to 50% by using sludge. The quality of the sludge is high and its content in metals is low or very low, especially when compared with the requirements of different certification standards for biosolid reuse applied in Sweden. The addition of waterworks sludge containing iron to a digester for the removal of dissolved hydrogen sulfide is a technically and economically good alternative when producing biogas. It is also one step closer to a circular economy, as replacing the use of virgin chemicals with the by-product waterworks sludge saves energy and materials and reduces the carbon footprint of the waterworks.