Investigation of Occupational Dermatological Problem with Additives in Polypropylene Manufacturing Pro c e s s

1 ) O b j e c t i v e s: To investigate the causative agents for the dermatological problems associated with the polypropylene manufacturing process. M e t h o d s: The study subjects consisted of 44 male workers involved in the polypropylene manufacturing process. Twenty-seven of them had been exposed to additives, and the remaining 17 had not. Among the 27 exposed, 10 had been exposed previously, and 17 are currently being exposed through their duties. Patch test were performed with three different concentrations, 0.1%, 1% and 10% of 10 different additives that was diluted with Vaseline. R e s u l t s: 18 subjects (41%) had positive reactions to the patch tests. Exposed group had a higher reaction rate (51.9%) than the control group (23.5%). When the positive reactions were further classified, 7, 6 and 5 were compatible with probably irritant, probably allergic, and mul - tiple hypersensitivity reactions respectively. The most frequent reactions were from Ultranox- 626 followed by Millad 3988, Armoslip-E and Songstab Sc-100. C o n c l u s i o n s : When considering the significantly higher probability of an allergic reaction rate among the currently exposed group compared to non- or previously-exposed groups, the nature of dermatological problems in a polypropylene plant is probably allergic. Ultranox-626, Millad3988, Armoslip-E and Songstab Sc-100 were the main causatives agents found in the process.