Design considerations for ionic liquid based electrochemical double layer capacitors

Abstract A critical parameter in the design of EDLCs is the determination of electrochemical stability limits for individual combinations of electrode and electrolyte. Using [EMIm][BF 4 ] as an example we demonstrate that the physical properties of the activated carbon used in the electrodes influence the permissible operating potential of an EDLC, and also that the binder material employed can have further effects. When [EMIm][BF 4 ] electrolyte is coupled with electrodes containing PTFE binder, operating potentials as wide as 3.8 V can be utilised. Due to the differences in response under opposing polarisations, it is necessary to employ an asymmetric mass loading in EDLC cells in order to make full use of the operating window. By balancing the charge in the cell, the differences in stable potential limits and capacitative behaviour can be overcome, however we also found that this balance can be influenced by the rate at which these parameters are determined. Three-electrode measurements show that using an appropriate mass loading ratio results in each electrode operating within their determined stability limits. Stable cycling of a full cell at an operating potential of 3.8 V was demonstrated over 50,000 cycles.