SnO 2 /n-Si solar cell
1981
Low cost and low production energy SnO 2 /n-Si solar cells with conversion efficiency of 15.4% (at best) (66mW/cm 2 , AMl spectrum) were obtained by low temperature CVD of SnO 2 using SnCl 4 , H 2 O and SbCl 5 as source meterial. The maximum processing temperature of the CVD was 350°C. This low temperature CVD processing makes continuous volume production of the cells far easier than conventional technologies. Stability of the cell was studied under various ambient condition and a stable cell/module structure was developed. Dependence of cell characteristics on the processing conditions and stability data of the fabricated cells are reported.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI