Multi-functional D-band I/Q modulator/demodulator MMICs in SiGe BiCMOS technology

This paper presents the design and characterization of a D-band (110–170 GHz) monolithic microwave integrated direct carrier quadrature modulator and demodulator circuits with on-chip quadrature local oscillator (LO) phase shifter and radio frequency (RF) balun fabricated in a 130 nm SiGe BiCMOS process with ft/fmax of 250 GHz/400 GHz. These circuits are suitable for low-power ultra-high-speed wireless communication and can be used in both homodyne and heterodyne architectures. In single-sideband operation, the modulator demonstrates a maximum conversion gain of 9.8 dB with 3-dB RF bandwidth of 33 GHz (from 119 GHz to 152 GHz). The measured image rejection ratio (IRR) and LO suppression are 19 dB and 31 dB, respectively. The output P1dB is −4 dBm at 140 GHz RF and 1 GHz intermediate frequency (IF) and the chip consumes 53 mW dc power. The demodulator, characterized as an image reject mixer, exhibits 10 dB conversion gain with 23-dB IRR. The measured 3-dB RF bandwidth is 36 GHz and the IF bandwidth is 18 GHz. The active area of both the chips is 620 µm × 480 µm including the RF and LO baluns. A 12-Gbit/s QPSK data transmission using 131-GHz carrier signal is demonstrated on modulator with measured modulator-to-receiver error vector magnitude of 21%.