Transparent MgAl2O4/LiF ceramics by hot-pressing: Host–additive interaction mechanisms issue revisited

Abstract Hot-pressing schedules – able to ensure a proper balance between positive and negative effects of LiF – allow fabrication of highly transparent MgAl 2 O 4 parts under low-pressure (≤50 MPa); peak temperatures in excess of 1550 °C are needed, with best results obtained at ∼1650 °C. At the concentration-levels and conditions present during hot-pressing, LiF does not react with spinel; it is inert also toward graphite. The lubricant and solvent abilities of liquid LiF make possible achievement of densification levels >90%TD under 1200 °C. All LiF leaves the specimens as such at temperatures ≤1550 °C. LiF's ability to close porosity at temperatures lower than those (>1350 °C) – which allow significant carbon penetration into spinel – is essential in achievement of transparency. Light absorption – occurring when carbon is present – is thus prevented. The main light-scattering defect produced by HPing, in the presence of LiF, is micro and macro-cracking; opaque spots, due to un-complete densification, are rare.