Effect of potassium doping on the thermal shock behavior of tungsten
2015
Abstract The effect of potassium doping on the thermal shock behavior of tungsten is investigated in this paper. Traditional W–K samples with different potassium contents were tested by an electron beam at an absorbed power density of 0.37 GW/m 2 . It shows that the damage after thermal shock test is smaller with potassium content increasing, but the cracking threshold is not improved. It suggests that for traditional W–K sample the potassium bubbles do have some pinning effects on tungsten but not enough to prevent cracking in transient high heat load. The thermal shock behavior of spark plasma sintered W–K (SPS–WK) was comparably studied. In SPS–WK, potassium bubbles not only distribute along the grain boundaries but also retain inside the grains. Size of the potassium bubbles inside the grains is in the range of 20–100 nm. This microstructure leads to higher thermal shock resistance and no obvious damage occurred after transient high heat load at 0.37 GW/m 2 . This may provide some important information to improve thermal shock resistance for W–K PFM.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
44
References
19
Citations
NaN
KQI