Relationships between the Macrostructure Features and Acoustic Parameters of Resonance Spruce for Piano Soundboards

An experimental examination of the relationship between the macrostructure characteristics and the acoustic properties of Norway spruce was performed. The macrostructure features were found to comprise the density (ρ), percentage of latewood (%LW), slope of grain (α), and angle the annual rings in a cross section (β). The main acoustic parameters of the research were the sound velocity, dynamic Young’s modulus, acoustic impedance (Z), and radiation coefficient (R). The acoustic properties for both the cross section and the longitudinal direction were calculated. Non-destructive evaluation (NDE) is the appropriate approach to define acoustic properties. Ultrasonic direct transmission and a transitory excitation method were used to calculate and compare the acoustic properties. A modal analysis was performed to predict the frequency range that corresponded to the different mode shapes. There were no significant differences between the two methods, yet an 80% reduction of the velocity, Z and R was identified between the longitudinal direction and the cross section. The equations used to define acoustic radiation according to the latewood component were defined, and strong correlations between the macrostructure and acoustic parameters were confirmed. A tight relationship was observed between the reduction of sound velocity and material density exceeding 440 kg m-3.