Evaluation of the Liquisolid Compacts Using Response Surface Methodology

Liquisolid Compacts technique has potential to develop sustained release formulations. It involves conversion of liquid drug (either solution or suspension) in non-volatile solvent into free-flowing, non adherent, dry looking and readily compressible powder. In the present work, an attempt was made to develop such formulation of Diltiazem HCl and evaluation using Response surface methodology. Liquisolid compacts were prepared by dissolving Diltiazem HCl in Polyethylene Glycol 400. Then a binary mixture of carrier-coating material, Avicel and Aerosil, was added to liquid medication under continuous mixing in mortar. The HPMC K4M was used as adjuvant for sustaining the drug release.  The pre-compression studies for all the formulations were also carried out. The Liquisolid compacts were evaluated in-vitro dissolution studies. The experimental data was evaluated using Design Expert Software. The % Drug Concentration, ratio of Carrier to Coating material and amount of HPMC K4M are taken as three factors. Response Surface methodology was used to study the influence of the each factor on the response. The present investigation showed that Polyethylene Glycol 400 has important role in release retardation of drug in Liquisolid compacts. The reduction in Tg can be reason for same. The Response surface methodology showed that all the factors were significantly affect the release at 16 hrs.