PHOTOCHEMICAL IMAGE FORMATION PROCESS FOR HIGH DENSITY PRINTED CIRCUIT PATTERNS
1981
A new method for fabricating high density printed circuit boards has been investigated. The procedure used for
photoselective metal deposition on the substrate consists of five steps: adhesion treatment, sensitization, nucleation,
fog inhibition and electroless metal deposition. An adhesive coated substrate was sensitized by introducing an aqueous
solution containig anthraquinone sulfonic acid sodium salts, reducible noble metal salts and alcohol. The sensitized
substrate was then exposed through a mask to a u.v. light. The noble metal nuclei produced by exposure were
developed by electroless copper deposition after rinsing with aqueous solutions containing complex agents.
Electrically-conductive patterns thus obtained can be further intensified by second electroless plate making.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
1
References
1
Citations
NaN
KQI