Heat treatment of calibrated ball bearing steel with high-frequency current
1966
1.
The proposed method of heat treatment of calibrated ball bearing steel by heating with high-frequency current ensures the properties required by GOST 801-60.
2.
We determined the optimum conditions ensuring recrystalization of cold worked steel (rate of motion of the rod through the inductor, 90 mm/sec at 760°C).
3.
The greatest loss of strength of the metal as the result of recrystallization occurs when the preliminary deformation is 17–18% and the conditions of operation of the induction equipment are optimum.
4.
When the degree of swaging is less than 17%, then heat treatment with high-frequency current is not recommended because recrystallization is not completed in these cases.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI