Dispersed phase morphology and fractionated crystallization of high-density polyethylene in PET/HDPE blends

The fractionated crystallization of high density polyethylene dispersed in a poly(ethylene terephthalate) matrix at composition of 15 wt-% was studied. The effect of the molecular weight of polyethylene with and without compatibilization was particularly addressed regarding its influence on the morphology of the blends. For non-compatibilized blends, the dramatic influence of the molecular weight of the polyethylene on the viscosity ratio and therefore on the dispersion is reflected on the relative intensities of the twin crystallization peaks of polyethylene that are developed upon cooling. These peaks reflect two sets of particles that are nucleated by more or less active heterogeneities. The influence of the addition of an ethylene-glycidyl methacrylate copolymer on the morphology and on the crystallization of the blends was also investigated. For a high molecular weight polyethylene, the compatibilizer shows less efficiency as far as dispersion is concerned.