Sources of sedimentary humic substances: vascular plant debris

A modern Washington continental shelf sediment was fractionated densimetrically using either an organic solvent, CBrCl3, or aqueous ZnCl2. The resulting low density materials (<2.06 g/ml) account for only 1% of the sediment mass but contain 25% of the sedimentary organic carbon and 53% of the lignin. The C/N ratios (30–40) and lignin phenol yields (Λ = 8) and compositions indicate that the low density materials are essentially pure vascular plant debris which is slightly enriched in woody (versus nonwoody) tissues compared to the bulk sediment. The low density materials yield approximately one-third of their organic carbon as humic substances and contribute 23% and 14% of the total sedimentary humic and fulvic acids, respectively. Assuming that the lignin remaining in the sedimentary fraction is also contained in plant fragments that yield similar levels of humic substances, then 50% and 30% of the total humic and fulvic acids, respectively, arise directly from plant debris. Base-extraction of fresh and naturally degraded vascular plant materials reveals that significant levels of humic and fulvic acids are obtained using classical extraction techniques. Approximately 1–2% of the carbon from fresh woods and 10–25% from leaves and bark were isolated as humic acids and 2–4 times those levels as fulvic acids. A highly degraded hardwood yielded up to 44% of its carbon as humic and fulvic acids. The humic acids from fresh plants are generally enriched in lignin components relative to carbohydrates and recognizable biochemicals account for up to 50% of the total carbon. Humic and fulvic acids extracted directly from sedimentary plant debris could be responsible for a major fraction of the biochemical component of humic substances.