Overview on Experiments On ITER‐like Antenna On JET And ICRF Antenna Design For ITER

Following an overview of the ITER Ion Cyclotron Resonance Frequency (ICRF) system, the JET ITER‐like antenna (ILA) will be described. The ILA was designed to test the following ITER issues: (a) reliable operation at power densities of order 8 MW/m2 at voltages up to 45 kV using a close‐packed array of straps; (b) powering through ELMs using an internal (in‐vacuum) conjugate‐T junction; (c) protection from arcing in a conjugate‐T configuration, using both existing and novel systems; and (d) resilience to disruption forces. ITER‐relevant results have been achieved: operation at high coupled power density; control of the antenna matching elements in the presence of high inter‐strap coupling, use of four conjugate‐T systems (as would be used in ITER, should a conjugate‐T approach be used); operation with RF voltages on the antenna structures up to 42 kV; achievement of ELM tolerance with a conjugate‐T configuration by operating at 3Ω real impedance at the conjugate‐T point; and validation of arc detection sys...