Electric Field Optimization in 170 kV Gas-Insulated Switchgear Spacer based on Non-Uniform Rational B-spline Curve

In this paper, the electric field at the spacer in a 170 kV gas-insulated switchgear (GIS) is optimized. Initially, the tangential and total electric fields around the original shape of the 170 kV GIS produced by a Korean company are calculated using a combination of the charge simulation method (CSM) and surface charge method (SCM). The contour of the spacer in the 170 kV GIS is found using a non-uniform rational B-spline (NURB) curve the effectiveness of which has been proved. By moving some control points in the NURB curve, the initial shape of the 170 kV GIS can be determined so that we may begin to optimize the electric field. Owing to the proposed algorithm, the overall process has a stable convergence. The objects that we want to design are the upper and lower parts of the spacer. Finally, we can find the shapes in which the tangential and total electric fields are optimized.