Acene-based organic semiconductors for organic light-emitting diodes and perovskite solar cells
2018
In this work, three novel acene-based organic semiconductors, including 2,7-bis(trimethylstannyl)naphtho[2,1- b :6,5- b ′]dithiophene ( TPA-NADT-TPA ), 4,4′-(anthracene-2,6-diyl)bis( N , N -bis(4-methoxyphenyl)aniline) ( TPA-ANR-TPA ) and N 2 , N 2 , N 6 , N 6 -tetrakis(4-methoxyphenyl)anthracene-2,6-diamine ( DPA-ANR-DPA ), are designed and synthesized for use in organic light-emitting diodes (OLEDs) and perovskite solar cells (PSCs). In OLEDs, devices based on TPA-NADT-TPA , TPA-ANR-TPA and DPA-ANR-DPA showed pure blue, blue green, and green emission, respectively. Also, the maximum brightness of the devices with a turn-on voltage of 3.8 V reached 8682 cd m −2 for TPA-NADT-TPA , 11 180 cd m −2 for TPA-ANR-TPA , and 18 600 cd m −2 for DPA-ANR-DPA . These new materials are also employed as hole transporting materials (HTMs) in inverted PSCs, where they were used without additives. The inverted devices based on these HTMs achieved an overall efficiency of 10.27% for TPA-NADT-TPA , 7.54% for TPA-ANR-TPA , and 6.05% for DPA-ANR-DPA under identical conditions (AM 1.5G and 100 mW cm −2 ). While the PSCs with TPA-NADT-TPA as the HTM achieved the highest efficiency, the DPA-ANR-DPA -based OLED devices showed the brightest emission and efficiency. Based on the obtained promising performance, it is clear that this molecular design presents a new research strategy to develop materials that can be used in multiple types of devices.
- Correction
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI