Experimental and numerical simulation studies of the fluidization characteristics of a separating gas–solid fluidized bed

Abstract Gas–solid fluidized bed separation expands the choices of highly efficient dry coal beneficiation methods. The hydrodynamics of 0.3–0.15 mm large Geldart B magnetite powder were studied using a combination of experimental and numerical methods to optimize the design of the solid medium used in the fluidized bed. The results show that the Syamlal–O'Brien drag model is suitable for simulating the bed and it is verified that simulated and experimental results are consistent with each other. If the static bed height is no more than 300 mm then the bed height has minimal effect on the fluidization characteristics. As the superficial gas velocity increases the bed activity is improved. However, at the same time the uniformity and stability of the bed drop. Therefore, the gas velocity should be adjusted to no more than 2.0 U mf . The density of the Geldart B bed is uniform and stable, which indicates a relatively high fluidization quality. Furthermore, compounded medium solids consisting of E , of 0.07 g/cm 3 and a recovery efficiency of 98.26%. This indicates that the bed has good separating performance. Nevertheless, to increase the applicability of the separating bed a further study emphasizing a decrease in the lower size limit of the magnetite powder should be performed.