Oxidation Behavior and Microstructural Evolution of Graphite Substrates with SiC and Si3N4 Coatings Prepared by Using a Solid-Vapor Reaction
2009
The oxidation behavior of graphite substrates with silicon carbide (SiC) and silicon nitride (Si3N4) coatings, prepared by using a solid-vapor reaction process, was investigated in cyclic oxidation tests. The e ect of the porosity of the substrate on the oxidation behavior was also investigated. Substrates with the SiC coating showed higher weight loss than those with the Si3N4 coating. Oxidation of the substrates with 10 and 13 % porosities with the Si3N4 coating took place at 900 C and at 1000 C, respectively. However, after long term cyclic oxidation tests, the substrate with 13 % porosity with the Si3N4 coating was oxidized at a relatively low temperature of 800 C, even though the weight loss was below 10 %. In the case of the SiC coatings, detachment of the coating region or full oxidation of the substrates took place whereas in the case of the Si3N4 coatings, no evidence of delamination or detachment of the coating region was observed after oxidation. The oxidation was a ected by the coating thickness and by the type of materials coated on the substrate, not by the porosity of the substrate itself, although the coating thickness did depend on the porosity of the substrate.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
1
Citations
NaN
KQI