Design of a scaling reduction system for geothermal applications

The aim of the EU 2020 GeoSmart project relies on the demonstration of innovative solutions to improve the flexibility and the efficiency of geothermal heat and power systems. This specific study focuses on issues related to silica scaling and its deposition on the reinjection wells. A limiting constraint for geothermal plants to fully utilize the thermal energy form well fluids is in fact the need to reinject geothermal brine at a high enough temperature to prevent thermodynamic fouling by silica scale deposition. GeoSmart aims to develop a solution based on retention system technology to control and reduce the silica scale formation before re-injection. Lowering reinjection temperature would strongly increase plant efficiency by providing extra useful heat. Based on silica scaling numerical simulation, the effects of parameters like pH, temperature and brine composition on silica polymerization and scaling deposition rates, the design and optimization of the retention system has been developed. The design aims to promote polymerization phenomena inside the tank so that scaling is consequently inhibited in the reinjection well pipes. Chemical additives and specific coatings have also been evaluated to guarantee the optimal required conditions. The case study is based on real-data referred to operational conditions and brine composition of the Zorlu Kizildere plant in Turkey. The economic and environmental impact of the retention system has been evaluated with positive outcomes. The in-site test and validation at industrial level of the above mentioned technology will be provided during the next activities of the GeoSmart project