Morphological and Permeability Fraction of Mixed Matrix Polysulfone Membrane on Batik Palembang Wastewater Treatment

High performance polysulfone (PSf) membrane has been prepared for treating of batik palembang wastewater. Many investigations attempted the use of polysulfone (PSf) membranes to filtrate dilute contaminant in textile wastewater. The matrix membrane is a mixture of PSf which is produced by adding inorganic materials to obtain a polymer that functions to manufacture the membrane by increasing hydrophilicity and impurity resistance. MMM were fabricated from a dope solution containing PSf/LiCl/DMF at different additives composition. Antifouling properties of membranes could be enhance with 0.0 - 10 wt.% LiCl that has been added into dope solution. Pure water permeation flux analysis (PWP), AFM and FESEM. From the results of research on FESEM, the PSf / LiCL membrane showed a fairly symmetrical cross-sectional structure containing two layers. The layers of the tiny finger-like structure on the edge of the perforated fibers and the holes like the larger fingers are mixed with the macrovoid layer in the middle section. PWP flux is not proportional to mean rough outer surface but higher water permeation. Therefore, PSf/LiCl exhibited a better performance that resulted a much lower fouling tendency than the naked membrane in batik Palembang wastewater treatment.