A New Design of a Linear Double-sided Printed Dipole Array Based on Bat Algorithm for Interference Suppression in the First Sidelobe Direction
2020
This study proposes a design of a double-sided printed dipole (DSPD) antenna array with a low first sidelobe level (FSLL) for interference suppression. The proposed array consists of ten DSPD antennas based on the Rogers RO4003C substrate (ɛr = 3.55). The FSLL has been compressed by imposing a single null at the centre of the first sidelobe. The excitation power distribution of the array has been calculated by using the bat algorithm with the amplitude-only control technique and has been implemented by a series-fed network. A back reflector, which is based on an FR4 substrate (ɛr = 4.4), has been used to improve the maximum gain. The simulation results show that the FSLL can be reduced with a null deep level (NDL) of −40 dB in the E-plane at the frequency of 3.5 GHz, while the maximum gain of the array is around 17.7 dBi, and the bandwidth is 600 MHz (3.3–3.9 GHz) with −10 dB of S 11. A prototype of the proposed DSPD antenna array has been fabricated and measured. A good agreement can be achieved between simulation and measurement results.
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
11
References
1
Citations
NaN
KQI