11.7 A Voltage-Tolerant Three-Level Buck-Boost DC-DC Converter with Continuous Transfer Current and Flying Capacitor Soft Charger Achieving 96.8% Power Efficiency and 0.87µs/V DVS Rate

In recent years, buck-boost converters have been widely utilized for battery-powered mobile systems such as RF power amplifiers, battery chargers, and LED drivers. However, in a wide battery voltage range, they face challenges including dynamic voltage scaling (DVS), wide load current range, and dynamic line/load transients while ensuring reliability for an industrial usage. To resolve these issues, the conventional buck-boost (CBB) converter should overcome the characteristic of discontinuity in the output transfer current (OTC) which causes degradation of loop dynamics and transient response. Several past works with continuous OTC have been proposed to resolve these problems, but their voltage conversion ratios are limited [1], [2]. Moreover, in [3], [4], a high-voltage (HV) process, which necessitates large active area and incurs high fabrication cost, is required to withstand voltage stresses over 10V (2×V IN ) applied across power switches. To overcome the above challenges, this paper proposes a voltage-tolerant three-level buck-boost (TLBB) converter. The TLBB has continuous OTC and uses only normal 5V CMOS devices for its switches. In addition, a voltage-tolerant dual channel-interleaved three-level buck-boost (DTLBB) converter is suggested for applications [5] requiring a wide range of load current and high conversion ratio while supporting fast DVS transition.