A Maximum-Eye-Tracking CDR With Biased Data-Level and Eye Slope Detector for \textNear-Optimal Timing Adaptation
2020
In this article, a maximum-eye-tracking clock and data recovery (MET-CDR) circuits for minimum bit error rate (BER) are presented. The proposed CDR does not require a BER counter or an eye-opening monitor with any iterative procedure to find the optimal sampling phase. The biased data level obtained from the weighted sum of error sampler outputs provides the actual eye height (EH) information in the presence of precursor intersymbol interference (ISI). Two samplers operating on two slightly different timings detect the current EH and the polarity of the eye slope so that the CDR can track the maximum EH where the slope becomes zero. Measured results show that the sampling phase of the maximum EH and that of the minimum BER match well. A prototype receiver fabricated in 28-nm CMOS process operates at 26 Gb/s with an eye-opening of 0.25 unit interval (UI) and consumes 87 mW while equalizing 23.5 dB of loss at 13 GHz.
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
20
References
1
Citations
NaN
KQI