Does flutter prevent drag reduction by reconfiguration

The static reconfiguration of flexible beams exposed to transverse flows is classically known to reduce the drag these structures have to withstand. But the more a structure bends, the more parallel to the flow it becomes, and flexible beams in axial flows are prone to a flutter instability that is responsible for large inertial forces that drastically increase their drag. It is, therefore, unclear whether flexibility would still alleviate, or on the contrary enhance, the drag when flapping occurs on a reconfiguring structure. In this article, we perform numerical simulations based on reduced-order models to demonstrate that the additional drag induced by the flapping motion is almost never significant enough to offset the drag reduction due to reconfiguration. Isolated and brief snapping events may transiently raise the drag above that of a rigid structure in the particular case of heavy, moderately slender beams. But apart from these short peak events, the drag force remains otherwise always significantly reduced in comparison with a rigid structure.