Peeling behavior and spalling resistance of CFRP sheets bonded to bent concrete surfaces

In this paper,the peeling behavior and the spalling resistance effect of carbon fiber reinforced polymer(CFRP) sheets externally bonded to bent concrete surfaces are firstly investigated experimentally.Twenty one curved specimens and seven plane specimens are studied in the paper,in which curved specimens with bonded CFRP sheets can simulate the concrete spalling in tunnel,culvert,arch bridge etc.,whereas plane specimens with bonded CFRP sheets can simulate the concrete spalling in beam bridge,slab bridge and pedestrian bridge.Three kinds of curved specimens with different radii of curvature are chosen by referring to practical tunnel structures,and plane specimens are used for comparison with curved ones.A peeling load is applied on the FRP sheet by loading a circular steel tube placed into the central notch of beam to debond CFRP sheets from the bent concrete surface,meanwhile full-range load-deflection curves are recorded by a MTS 831.10 Elastomer Test System.Based on the experimental results,a theoretical analysis is also conducted for the specimens.Both theoretical and experimental results show that only two material parameters,the interfacial fracture energy of CFRP-concrete interface and the tensile stiffness of CFRP sheets,are needed for describing the interfacial spalling behavior.It is found that the radius of curvature has remarkable influence on peeling load-deflection curves.The test methods and test results given in the paper are helpful and available for reference to the designer of tunnel strengthening.