New Methods of Damping Very Fast Transient Overvoltages in Gas-Insulated Switchgear
2014
Very fast transient overvoltages (VFTO) are a well-known phenomenon in gas-insulated switchgear. They are mainly generated due to several pre- or restrikes during disconnector switching operations. Since VFTOs may cause complications in substations, a reliable method for damping these transient voltages is of great interest, especially in ultra-high voltage applications. Two new approaches are presented in this paper and compared with a matched radio-frequency resonator, which is an already existing theory. The new methods are an inductive arrangement with surge arrestors and rings of nanocrystalline tape-wound cores. All methods were investigated inside a high-voltage experimental test setup. Therefore, VFTOs with amplitudes of 600 kV and more were generated. The first VFTO amplitude was damped by up to 20%. Even higher damping is possible depending on the damping method and the test conditions. In addition to high-voltage tests and their results, this paper illustrates the theoretical background of all damping methods.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
10
References
21
Citations
NaN
KQI