Chemicals associated with biodegradable microplastic drive the toxicity to the freshwater oligochaete Lumbriculus variegatus

Microplastics (MPs) as complex synthetic pollutants represent a growing concern for the aquatic environment. Previous studies examined the toxicity of MPs, but infrequently used a natural particle control such as kaolin. The cause of toxicity, either the physical structure of the particles or chemical components originating from the MPs, has rarely been resolved. Moreover, the ecotoxicological assessment of biodegradable plastics has received little attention. To narrow down the main driver for toxicity of irregular biodegradable MPs, we conducted a series of 28-days sediment toxicity tests with the freshwater oligochaete Lumbriculus variegatus and recorded the number of worms and dry weight as endpoints. Therefore, MPs containing several biodegradable polymers were either mixed with the sediment or layered on the sediment surface with concentrations from 1 to 8.4% sediment dw-1. Kaolin particles were evaluated in parallel as particle control. Furthermore, aqueous leachates and methanolic extracts as MP equivalents as well as solvent-treated, presumably pure MPs were investigated after mixing them into the sediment. Our results reveal that MP mixed with the sediment induced stronger adverse effects than layered MP. Kaolin particles caused no adverse effects. In contrast, they enhanced dry weight in both applications. The impact of aqueous leachates was comparable to the control without MPs, whereas methanolic extracts affected the worm number at the highest concentration with 100% mortality. Solvent-treated, presumably pure MP resulted in mostly higher worm numbers when compared to untreated MPs mixed into the sediment. This study demonstrates that MPs mixed into the sediment affect L. variegatus more than MPs that are layered on the sediment surface. Kaolin as a natural, fine-sized particle control created somewhat favorable conditions for the worm. The main driver for toxicity, however, proved to be chemicals associated with the plastic product and its previous content.