Structural Characterization Of Sic Epitaxial Layers Grown On Porous Sic Substrates

2000 
A layer of porous SiC was fabricated by surface anodization of commercial 4H and 6H-SiC (0001)Si face off-axis wafers. A 8.5 μm 4H–SiC epilayer was grown on porous SiC (PSC) substrates using atmospheric pressure CVD. TEM investigation on cross-sectional specimens of the CVD epitaxial layers revealed that the presence of pores in the substrate does not lead to the formation of any micropipe in the epitaxial layer. The investigation also failed to detect a more than usual dislocation density on the basal plane of the epitaxial layer. Based upon the results of various analytical techniques applied to the CVD deposit we propose that the density of screw dislocations in the epitaxial layer is less than 5–10 4 cm −3 . It should be noted that the density of similar types of dislocations in the initial substrate as determined by the TEM was ∼10 6 cm −3 , so this preliminary investigation indicates that the epitaxial layer grown on PSC may have a reduction in dislocation density of more than an order of magnitude over those grown on conventional SiC substrates that are not porous. Synchrotron white beam x-ray topography (SWBXT) was performed on these layers. Comparison between the dislocation density on the porous and standard epitaxial layers proved to be very similar using this technique.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    5
    References
    2
    Citations
    NaN
    KQI
    []