Corrigendum to “Multi-modal Fission in Collinear Ternary Cluster decay of 252Cf(sf,fff)” [Phys. Lett. B 746 (2015) 223]

Abstract The scale of the ordinate axis of Fig. 4 on page 226 of PLB 746 (2015) 223 was incorrect. The new version of Fig. 4 (which is “Fig. 1” in the present note) with the correct ordinate axis is given here (upper part). The lower part shows the previous version. Five potential wells and barriers are shown. Considering a sequential process, two barriers are relevant for the sequential decay, with equal barriers for the symmetric cases with a smaller fragment at the center (in these cases only one barrier is shown). For the asymmetric case of 70 Ni + 50 Ca + 132 Sn, two different barriers appear, denoted as ( B 1 ) and ( B 2 ), which correspond to the interactions of the middle cluster 50 Ca with the outer nuclei 70 Ni and 132 Sn, respectively. In a sequential mechanism the separation of 132 Sn from the other part via the barrier B 2 has the smaller height, thus it is favored for the first step. For the second step the barrier ( B 1 ) between Ni and Ca, appears at smaller distances (dot-dashed curve) and is higher. The order of the barriers of the five channels is unchanged, compared to the figure in Ref. W. von Oertzen et al., Phys. Lett. B 746 (2015) 223.