Development of Ultra-Low-Noise TES Bolometer Arrays
2016
SRON is developing ultra-low-noise transition edge sensors (TESs) based on a superconducting Ti/Au bilayer on a suspended SiN island with SiN legs for SAFARI aboard SPICA. We have two major concerns about realizing TESs with an ultra-low NEP of \(2\times 10^{-19}~\hbox {W}/\sqrt{{\text {Hz}}}\): achieving lower thermal conductance and no excess noise with respect to the phonon noise. To realize TESs with phonon-noise-limited NEPs, we need to make thinner (\({<}0.25~\upmu \hbox {m}\)) and narrower (\({<}1~\upmu \hbox {m}\)) SiN legs. With deep reactive-ion etching, three types of TESs were fabricated in combination with different SiN island sizes and the presence or absence of an optical absorber. Those TESs have a thin \((0.20~\upmu \hbox {m}\)), narrow (0.5–0.7 \(\upmu \hbox {m}\)), and long (340–460 \(\upmu \hbox {m}\)) SiN legs and show \(T_{\mathrm {c}}\) of \({\sim }93~\hbox {mK}\) and \(R_{\mathrm {n}}\) of \({\sim }158~\hbox {m}{\Omega }\). These TESs were characterized under AC bias using our frequency-division multiplexing readout (1–3 MHz) system. TESs without the absorber show NEPs as low as \(1.1\,\times \,10^{-19}~\hbox {W}/\sqrt{{\text {Hz}}}\) with a reasonable response speed (\({<}1~\hbox {ms}\)), which achieved the phonon noise limit. For TESs with the absorber, we confirmed a higher \(\hbox {NEP}_{\mathrm {el}} ({\sim }5\,\times \,10^{-19}~\hbox {W}/\sqrt{{\text {Hz}}}\)) than that of TESs without the absorber likely due to stray light. The lowest NEP can make the new version of SAFARI with a grating spectrometer feasible.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
13
References
25
Citations
NaN
KQI