A new mechanism and kinetic analysis for the efficient conversion of inorganic bromide in waste printed circuit board smelting ash via traditional sulfated roasting.

Abstract The waste printed circuit board smelting ash (WPCB-SA) produced in the waste printed circuit board smelting process is a hazardous material that not only contains valuable metals, but also contains a large amount of toxic and harmful inorganic bromides. The utilization of metals has received considerable attention in previous studies, but the recovery of hazardous bromides requires further study. In this article, a new idea of converting inorganic bromine in WPCB-SA by traditional sulfated roasting is proposed. Debromination kinetics under simulated experimental conditions are discussed, and kinetic equations are established. The kinetic results show that during low-temperature sulfated roasting, the conversion of Br in CuBr and PbBr2 conforms to the chemical reaction diffusion model and diffusion control the product layer model, respectively. A possible reaction mechanism is also proposed. Our research shows that the conversion of Br in CuBr is divided into three processes: covalent bond decomposition, hydrogen ion form acid, copper ion form salt, and HBr oxidation conversion, whereas the conversion of Br in PbBr2 is divided into two processes: sulfuric acid ionization, lead ion form salt and HBr oxidation conversion. This work provides the theoretical basis for the improvement and application of inorganic bromide recovery technology in WPCB-SA.