Microstructure modification and resultant mechanical properties of Mg–6Zn–1.5Ca (wt%) alloy through hot extrusion

The microstructure and tensile property of extruded Mg–6Zn–1.5Ca (wt%) alloy were examined by means of electron backscattered diffraction, scanning and transmission electron microscopy. A bimodal microstructure featuring fine dynamically recrystallized (DRXed) grains with weaker texture and coarse-deformed region with strong basal texture and fine precipitates was achieved in the as-extruded Mg–Zn–Ca alloy, which resulted in a yield strength as high as 305 MPa and a moderate elongation to fracture of 8.6%. Dynamic precipitation was detected in the deformed region, which inhibited the dynamic recrystallization process. The texture intensity in the DRXed region was weakened compared with that in the deformed region, which was associated with the preferred nucleation during dynamic recrystallization. Such texture weakening effects gave rise to an obvious ductility improvement for the as-annealed alloy.