MEASUREMENT OF AFM CANTILEVER SPRING CONSTANT BY USING THE SURFACE PROFILE

This study introduces a new method of measuring the stiffness (spring constant) of cantilevers that is designed to improve the measurement accuracy of (atomic force microscopy) (AFM). AFM cantilever spring constants are determined by the relation between the slope of the step height ascertained from the surface profile measurement results, and the size of the cantilever. The surface profile measurements of the standard specimens with three different step heights (height: 100, 500, and 1000 nm) were conducted using a standard cantilever with different stiffness. As a result of this exercise, the profile slope was found to be proportional to cantilever stiffness, and the necessity was uncovered to conduct a similar experiment in order to clarify the quantitative relation between stiffness and the profile slope when the same kind of cantilever is utilized.