BYPASS SYSTEM FOR SHUNTING OF ELECTROMAGNETS FOR ACCELERATORS AND STORAGE RINGS

2008 
The bypass module was developed for correction of magnetic field in the bending magnet gap through partially taking current away from the coil. The SHUNT-20 bypass module that is presented in this work is able to take a current of up to 20A away from the coil of electromagnet. The device developed allows both recuperation of the taken energy to the main power source of the electromagnet and energy dump to a ballast load. The bypass module is remotely monitored and controlled through a CAN-bus. The SHUNT-20 modules are made by the Switch Mode Technology with application of the up-to-date components in the “Euromechanics” standard.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    0
    References
    1
    Citations
    NaN
    KQI
    []