Study on the preparation of Ni-SDC porous anode
2003
The porous NiSDC cermet, which has been used as the anode for solidoxide fuel cells (SOFC) are fabricated by drypressing process. The effects of the press process and sintering process on the density and porosity were investigated. The microstructure of NiSDC cermet were analyzed by scanning electron microscopy (SEM) and Xray diffractometer. The TG curve that NiO was reduced to Ni was conducted by DSC/TG thermal analyzer. The results show that the NiO has been reduced in H2-Ar2 at 850~900 °C for 2 hour to obtain NiSDC cermet. The microstructure and pore distribution of NiSDC cermet are homogenous and the fine SDC grains were uniform dispersed in Ni skeleton network.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI