A fully-adaptive wideband 0.5–32.75Gb/s FPGA transceiver in 16nm FinFET CMOS technology

2016 
This paper describes the design of a low power fully-adaptive wideband, flexible reach transceiver in 16nm FinFET CMOS embedded within FPGA. The receiver utilizes a 3-stage CTLE with a segmented AGC to minimize parasitic peaking and 15-tap DFE to operate over both short and long channels. The transmitter uses a swing boosted CML driver architecture. Low noise wideband fractional N LC PLLs combined with linear active inductor based phase interpolators and high speed clocking are utilized for low jitter clock generation. The transceiver achieves >1200mV dpp TX swing with −15 over a 30 dB loss backplane at 32.75 Gb/s, while consuming 577 mW.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    4
    References
    8
    Citations
    NaN
    KQI
    []