A novel cooling geometry for subsea variable speed drives

Abstract Experimental and theoretical analyses are conducted to evaluate the passive cooling performance of a novel geometry for subsea variable speed drives, a common piece of equipment in deep-sea oil exploration. Relying on the sea water as a low-temperature thermal reservoir, the new design forms an enclosed, annular space with centrally located modular boards that compose the power electronics inverter. Buoyancy-induced motion of a dielectric coolant conveys the heat dissipated by the electronic boards to the sea water through the outer and innermost walls of the annular enclosure. A thermal network model is implemented and used to optimize the enclosure geometry through a genetic algorithm, which served as a reference for a scaled experimental setup. A Computational Fluid Dynamics (CFD) simulation of the conjugate heat transfer yielded temperature distributions on the electronic boards and temperature and fluid velocity fields inside the enclosure. A comparison between the experimental data and the modeling results indicated a good agreement, with average RMS deviations of a modified Nusselt number of 7.0% and 8.5% for the thermal network and CFD analysis, respectively. For a 140-W operating point dissipation rate in the scaled test setup, the thermal network and the CFD models presented maximal deviations of 4°C and 2.3°C with respect to the heat sink temperature measurements.