Antibacterial Nanocomposites Based on Fe3O4–Ag Hybrid Nanoparticles and Natural Rubber-Polyethylene Blends

For the vulcanized natural rubber (NR), incorporation of silver nanoparticles (AgNPs) into the NR matrix did not exhibit the bactericidal property against Escherichia coli (E. coli). However, incorporation of AgNPs into polyethylene (PE) matrix showed good antibacterial activities to both Gram-negative and Gram-positive bacteria. In the present work, NR/PE (85/15) blends have been prepared by melt blending with presence of compatibilizer in an internal mixer. To possess antibacterial property, AgNPs (5–10 nm) or Fe3O4–Ag hybrid nanoparticles (FAgNPs, 8 nm/16 nm) were added into PE matrix before its blending with NR component. The tensile test indicated that the presence of compatibilizer in NR/PE blend significantly enhanced the tensile strength and elongation at break (up to 35% and 38% increases, resp.). The antibacterial activity test was performed by monitoring of the bacterial lag-log growth phases with the presence of nanocomposites in the E. coli cell culture reactor. The antibacterial test showed that the presence of FAgNPs in NR/PE blend had a better antibacterial activity than that obtained with the lone AgNPs. Two similar reasons were proposed: (i) the faster Ag