Development of a deuterium-ice extruder for inertial confinement fusion experiments on the Z Facility.

A deuterium-ice extruder has been developed for inertial confinement fusion experiments on the Sandia National Laboratories Z Facility. The screw-driven extruder is filled via desublimation, where a slow flow of deuterium gas enters the extruder cavity and freezes to the walls without entering the liquid phase. Ice generated in this manner is optically clear, demonstrating its high uniformity. When the extruder cavity is filled with ice, the screw is driven downward, closing off the gas-fill line. With the ice cavity isolated, further screw rotation compresses the deuterium through a nozzle, extruding a fiber. Fiber diameters ranging from 200 to 500 µm have been extruded to lengths of 1.5 feet before hitting the vacuum chamber floor. The fiber straightness improves with the nozzle length-to-diameter aspect ratio. Deuterium-ice fibers can persist in high vacuum for more than 10 min before breaking free from the nozzle. The peripheral infrastructure required for Z experimental operations is under development. An in-vacuum stepper-motor-based drive system will allow remote operation, and a translating cathode will ensure proper placement of the fiber in the powerflow hardware.