Influence of oil contamination levels on hydrocarbon biodegradation in sandy sediment

The influence of oil concentration on hydrocarbon biodegradation in a sandy sediment was studied in polyvinyl chloride reactors (0.450.280.31 m) containing 76.8 kg of beach sand in natura, where the upper layer was artificially contaminated with petroleum. The oil-degrading microorganisms used consisted of a mixed culture named ND, obtained from landfarming and associated with indigenous microorganisms. On the 28th day of the process, the degradation in reactors containing sandy sediment contaminated with light Arabian oil and presenting an initial oil content of 14, 21 or 28 g kg ˇ1 reached the following levels (%): 33.7, 32.9 and 28.9 for oil and grease; up to 88.3, 35.3 and 13.0 for C14‐C26 n-alkanes; and 100, 61.3 and 59.4 for pristane, respectively. Phytane removal (37.1%) was only detected in the reactor contaminated with the lowest oil concentration studied. These results, together with the expressive bacterial growth observed (from 10 6 to 10 11 cfu g ˇ1 ) give strong support to the argument that biodegradation was the dominant component of the remediation process. Susceptibility to biodegradation was inversely proportional to increasing oil contamination. The degradation of branched alkane: pristane was not repressed by the presence of n-alkanes. # 2001 Elsevier Science Ltd. All rights reserved.