Termoconformado de composites termoestables fabricados por pultrusión

In this work the development of a profile manufactured by pultrusion and thereafter curved by thermoforming is presented. The pultrusion profile is based on a new thermostable epoxy resin with dynamic bonds capable of being reprocessed, repaired and recycled thanks to the incorporation of reversible links within its reticulated structure (3R Technology). Being a resin that contains dynamic bonds, the cured composite shows unexpected properties for thermosetting materials. In a first phase, a new resin/hardener formulation processable by pultrusion with a viscosity, adhesion to the fibre and speed of curing similar to a conventional formulation have been developed and in a second phase, taking into account the properties of the new composite material, the parameters of the thermoforming process (pressure, temperature or speed of thermoforming) have been analysed and optimized. Thanks to the combination of pultrusion and thermoforming processes, longitudinal 3R composite profiles acquire a new curved geometry defined by the design of a mould. In this way, the thermoforming of the straight profiles will allow manufacturing curved parts from profiles of thermostable composites with high mechanical performance manufactured by pultrusion in medium-high rates, typical of the automotive sector. Additionally, it will be shown that the profiles manufactured using these composites can be recycled, reducing the amount of waste generated and offering these materials a second useful life.