Enhanced mass transfer and service time of mesh Ti/Sb-SnO 2 electrode for electro-catalytic oxidation of phenol.

Titanium-based SnO2 with Sb dopant (Ti/Sb-SnO2) was of interest in the field of electro-catalytic oxidation due to its high organic oxidation rates. However, the relatively poor mass transfer performance and short service time limited its practical application. To overcome this problem, Ti/Sb-SnO2 electrode was fabricated on mesh substrate and used as the anode for electrochemical oxidization of phenol. Compared to the anode prepared on planar Ti, the mesh anode with compact and uniform catalyst surface lowered electron transfer resistance and higher Oads content (17.41%), which benefited the generation of hydroxyl radicals (·OH) (increment of 24.5%). In addition, this structure accelerated the fluid perturbation around electrode in microscopic scale as the COMSOL simulation result indicated; the electric potential on mesh anode varied regularly along the undulant terrain of electrode so that the mass transfer coefficient was enhanced by 1.67 times. These structure-dependent characteristics contributed to the superior electro-catalytic performance toward degradation of phenol. Experimental results showed that mesh anode had a higher TOC removal efficiency of 90.6% and mineralization current efficiency of 20.1% at current density of 10 mA cm-2, which was 9.95% and 21.6% higher than the planar anode, and the service lifetime was 1.89 times longer than planar anode. This highly electro-catalytically active and stable Ti/Sb-SnO2 mesh electrode showed a potential application prospect toward electro-catalytic degradation process.