Tensile properties of chrome tanned leather waste short fibre filled unsaturated polyester composite

Waste leather from industries was commonly disposed via land filling or incineration where the oxidation of Cr III to Cr VI by oxidants (such as peroxides and hypohalide) can easily occur. Cr VI is well known as carcinogenic and mutagenic element where the excessive exposure to this element can be very harmful. As an alternative way, the leather waste from footwear industry was utilised as filler in unsaturated polyester composite (UPC). The leather waste was ground using 0.25 mm mesh size and used without any chemical treatment. The sample was fabricated via castingtechnique and the study was carried out at 1 wt%, 2 wt% and 3 wt% filler loading. The leather waste filled composites showed lower tensile strength and Young’s modulus than the unfilled composite. The increasing loading amount of leather waste led to the decreased in tensile strength and Young’s modulus. The tensile results was supported by the decreasing pattern of density result which indicates the increasing of void content as the filler lo...