Experimental investigation of yield behaviour of metal powder compacts

AbstractIn this paper the compaction and yield response of two steel and two copper powders are examined. These were chosen to determine how the material response depends on the type of material and the morphology of the powder particles. Experiments were conducted in a computer controlled triaxial cell. Here, concentration is on the response during simulated, frictionless closed die compaction, whereby the radial stress is controlled so as to keep the radius of the sample constant. The compaction process was stopped at regular intervals and a series of probing paths were followed in stress space to construct the yield surface for the compact.The experimentally determined yield surfaces are compared with yield surfaces predicted by empirical models and micromechanical models of the Fleck type, which assume that the compact consists of monosized spherical particles. During the early stages of compaction the form of the yield surfaces for spherical powders are consistent with Fleck's micromechanical model, ...